Sargent Manufacture Warranty
LIMITED WARRANTY:
SARGENT warrants that its products sold under the “SARGENT” trade name in the United States of America are free from defects in workmanship and material s under normal use and service . Th is warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non SARGENT products or parts.
This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.
The only liability of SARGENT, in tort or contract whether under this warranty or otherwise, shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, with in the stated time period listed below, after delivery to the original purchaser.
T-Zone (11-Line), Bored-In Lever Lock 10 years
1130, 1331, 1431, 268, 269, 278, 281, 421, 351 Series Closer Body 10 years • 9200/8200/7800, Mortise Lock 10 years
10L, Bored-In Lever Lock 7 years
7000/7900 Series Vertical Rod Lock 5 years
80/90 Series Exit Device or Trim 5 years • Overhead Holders & Stops 5 years
7L, Bored-In Lever Lock 5 years • 8 Line, Bored-In Knob Lock 3 years
20/30 and P800 Series Exit Device or Trim 3 years
All Electromechanical and Electronic Products 2 years
All other SARGENT products 1 year
Warranty for Cylinders Factory or Field Combinated:
Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite, molybdenum disulfide or Polylube (trademark) are recommended. Petroleum based liquid lubricants should only be used in cylinders in harsh or corrosive environments and should not be missed with dry lubricants.
Warranty for Cylinders Field Combinated:
1. Keys shall be cut to the SARGENT® key bitting specifications required for the particular keyway and depth system.
2. All pin length s shall be selected according to prevailing factory standards.
3. Original SARGENT® cylinder components, including pin tumblers and key blank s, shall be used.
4. We reserve the right to void the warranty if we deem that a malfunction is a result of nonoriginal components which do not conform to SARGENT® standards.
Keying Systems:
All bittings shall be originated or authorized by the SARGENT® Key Systems Department to be compatible with one another in a specific type of cylinder (conventional , security, high security, interchangeable core, removable core) and with in a particular keying system.
SARGENT® will not pay for the cost of repair performed other than in accordance with this warranty.
Refer to our Returned Goods Pol icy regarding the return of a product or component part believed to be defective as covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the event such examination reveal s a defect covered by this warranty, the product will be repaired or replaced.
THIS WARRANTY IS IN LIEU OF ALL OTH ER EXPRESS WARRANTIES. TO TH E EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO TH E DURATION OF TH IS WARRANTY. SARGENT®MANUFACTURING COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS TH E AUTHORITY TO INCREASE OR ALTER TH E OBLIGATIONS OF TH IS WARRANTY.
SOME STATE DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR TH E EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO TH E ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. TH IS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTH ER RIGHTS WH ICH VARY FROM STATE TO STATE.
SARGENT Manufacturing Company